Zeven Provincien - set of blocks for running rigging
Code: SET-KS005-02Product detailed description
Set contains a total of 166 wooden walnut blocks for running rigging. Their exact listing can be found in the table below, which also corresponds to the markings of the blocks in the plans you will receive with the set. This kit does not include blocks for sail handling rigging this must be ordered separately as SET-KS005-03 if you plan to install sails on the model.
This set of blocks is based on the plans by Otte Blom, who has been studying this boat for a long time. You can visit his website HERE. The rigging plans can be found in Chapter 80.
Additional parameters
| Category: | Zeven Provinciën 1:72 |
|---|---|
| 1: | C-WaB-SB1/3 CNC single block 1/3mm - Walnut-old type (35x) |
| 2: | C-WaB-SB1/5 CNC single block 1/5mm - Walnut-old type (10x) |
| 3: | TR Rope threader (2x) |
| 4: | C-WaB-SB1/4,5 CNC single block 1/4,5mm - Walnut-old type (40x) |
| 5: | C-WaB-SB1/6 CNC single block 1/6mm - Walnut-old type (4x) |
| 6: | C-WaB-SB1/8 CNC single block 1/8mm - Walnut-old type (8x) |
| 7: | C-WaB-DB2/6 CNC double block 2/6mm - Walnut -old type (1x) |
| 8: | WaB-LB/6 CNC Liftblocks 6mm - Walnut (2x) |
| 9: | WaB-LB/8 CNC Liftblocks 8mm - Walnut (4x) |
| 10: | WaB-VB6 CNC Violin Block 6mm - Walnut (8x) |
| 11: | WaB-VB8 CNC Violin Block 8mm - Walnut (13x) |
| 12: | WaB-ShB7 CNC Sheed Block 7mm - Walnut (2x) |
| 13: | WaB-ShB10 CNC Sheed Block 10mm - Walnut (4x) |
| 14: | WaB-RS8 Ramshead Block 8mm Walnut (1x) |
| 15: | WaB-RS10 Ramshead Block 10mm Walnut (1x) |
| 16: | WaB-RS12 Ramshead Block 12mm Walnut (1x) |
| 17: | WB-CR2,5 Wooden rope grommet 2,5mm (4x) |
| 18: | WB-CR3,5 Wooden rope grommet 3,5mm (1x) |
| 19: | PE-LH3/B Ship hooks 3mm/th.0,3mm/12pcs - black patinate (2x) |
| 20: | WaB-SB1/2 CNC single block 1/2mm - Walnut (22x) |
| 21: | WaB-SB1/2,5 CNC single block 1/2,5mm - Walnut (5x) |
Be the first who will post an article to this item!
Add a comment