Zeven Provincien - set of blocks for standing rigging
Code: SET-KS005-01Product detailed description
The set contains a total of 266 recommended blocks for standing rigging. Their exact specification can be found in the table below, which also corresponds to the marking of the blocks in the plans you will receive with the set.
This set of blocks is based on the plans by Otte Blom, who has been studying this boat for a long time. You can visit his website HERE. The rigging plans can be found in Chapter 80.
Additional parameters
| Category: | Zeven Provinciën 1:72 |
|---|---|
| 1: | TR Rope threader (2x) |
| 2: | WB-DD2,5mm Deadeye diameter 2,5mm (72x) |
| 3: | WB-DD3,5mm Deadeye diameter 3,5mm (74x) |
| 4: | WB-DD5mm Deadeye diameter 5mm (78x) |
| 5: | WaB-BD/8,5 CNC big deadeyes 8,5mm - Walnut (6x) |
| 6: | WaB-BD/12 CNC big deadeyes 12mm - Walnut (4x) |
| 7: | C-WaB-SB1/3 CNC single block 1/3mm - Walnut-old type (5x) |
| 8: | C-WaB-SB1/5 CNC single block 1/5mm - Walnut-old type (8x) |
| 9: | C-WaB-SB1/9 CNC single block 1/9mm - Walnut-old type (1x) |
| 10: | C-WaB-TB3/7 CNC triple block 3/7mm - Walnut-old type (2x) |
| 11: | PE-LO1,5/B Eyelets 1,5mm/th.0,3mm/50pcs - Black patinate (1x) |
| 12: | PE-LH3/B Ship hooks 3mm/th.0,3mm/12pcs - black patinate (1x) |
| 13: | WaB-VB8 CNC Violin Block 8mm - Walnut (6x) |
| 14: | C-WaB-SB1/10 CNC single block 1/10mm - Walnut-old type (1x) |
| 15: | WaB-VB6 CNC Violin Block 6mm - Walnut (1x) |
| 16: | C-WaB-SB1/4,5 CNC single block 1/4,5mm - Walnut-old type (6x) |
| 17: | BP8 Belaying pin 8mm (5/16") (100x) |
| 18: | WaB-SB1/2,5 CNC single block 1/2,5mm - Walnut (5x) |
Be the first who will post an article to this item!
Add a comment