Victory 1:180 - Oak wooden deck for Airfix model
Code: D076/OProduct detailed description
Link to the kit HERE
Link to complete accessories for this model HERE
Instructions and workflow can be found HERE
Material: veneer thickness of 0.3mm, laminatrd: oak
Description of deck: Deck is engraved to the veneer to match the historical facts. It is demonstrated by photos of the Victory board, which stands in dry dock at the English Portsmouth. Design of peripheral boards is called "Waterway". Ending boards into the waterway, especially at the bow so. "Crochet" and narrowing the boards toward bow and stern sides of the ship. Marking pins so called. "Treenline" by which deck was nailed to the deck-beam (beams holding the deck of the ship) corresponds to the plans, as seen on the picture. Boat plans are used from the book describing the construction of the ship - “100 gun ship Victory”, which can be found among the books on my website.
Veneer deck accurately fit to the plastic deck for this model. There are cut out all the openings on the deck, such as on the plastic substrate.
Additional parameters
| Category: | Victory - 1:180 Airfix |
|---|---|
| EAN: | 8594193990535 |
Be the first who will post an article to this item!