Cutty Sark, Thermopylae - set of Clamps of Blocks
Code: SET-CS015Product detailed description
Model kit Cutty Sark 1:96, Revell or Thermopylae 1:96, Revell
Complete accessories Cutty Sark and Thermopylae 1:96, Revell
Instructions
Set of recommended Cammps of Blocks for Rigging of models
The pulleys that were part of the tensioning hoists for lifting the yards and tensioning of the sheets of sails were hooked to the deck or the mast foot. And for this hooking, metal sleeves around the pulley with a hook in the lower part or an eye in the upper part were used to attach the chains for tensioning the slats.
See the Clamps usage table:
| Cutty Sark 1:96 | Page of plans | ||||
| Clamps of Blocks | Blocks | Lifts | Braces | pcs | sets |
| PE-CB-1A2/2-B | WaB-SB1/2 | 14 | 14 | 5 | |
| PE-CB-1/3-B | WaB-SB1/3 | 4 | 14 | 18 | 2 |
| PE-CB-1/4-B | WaB-SB1/4 | 8 | 8 | 1 | |
| PE-CB-1/5-B | WaB-SB1/5 | 4 | 4 | 1 | |
| PE-CB-1A2/2-B | WaB-DB2/2 | 14 | 14 | 0 | |
| PE-CB-2/3-B | WaB-DB2/3 | 12 | 12 | 2 | |
| PE-CB-3/3-B | WaB-TB3/3 | 4 | 4 | 1 |
I recommend this set only to very experienced modelers, due to the difficulty of attaching the clamps on small blocks.
Additional parameters
| Category: | Cutty Sark, Thermopylae - 1:96 Revell |
|---|---|
| Weight: | 0.05 kg |
| Manufacturing company : | HiSModel |
|---|---|
| Address : | Bedřicha Nikodema 4476/15 Ostrava 708 00 web: www.hismodel.com tel: +420 736643287 |
| E-mail : | message@hismodel.com |