Accessories of Ship models / Blocks / Deadeyes

Dear Modelers,

One of the basic elements of a good model of historic ships are blocks for rigging. It is relatively difficult to produce high quality blocks, especially in larger quantities. That is why our company HiSModel produce and offers top-quality blocks from walnut wood on CNC machine. We produce a wide range of blocks in sizes from 2 to 12 mm. Standard single, double and triple blocks are available in sizes from 2 to 10 mm. Moreover, we offer violin, ramshead and heart blocks in sizes from 4 to 12 mm. Deadeyes are from the production of Amati company. The dimensions and marking of blocks are in the table below together with photos. Photos especially of small blocks are magnified. We produce blocks, which correspond in shape and size to the British standard around the turn of the 18th and 19th centuries. We are also preparing to produce a second set of blocks that will match to the continental standards according to ANCRE.

For right choice of blocks, it is important to know which, where and what size of blocks should be used.
The best way to determine the right sizes of blocks is to use professionally prepared plans. If you do not have this option and you are unsure about the block sizes you need for your model, you can use an attached table. The table is based on information and tables from the book “Historic Ship models” by Wolfram zu Mondfeld, from pages 272 and 308You can download the table with calculation of ropes diameters and blocks sizes HEREIn this Excel spreadsheet you just simply enter the required scale of the model and the actual diameter of the main mast on the main deck. All dimensions of ropes and blocks are calculated based on this table.

In order to make the use of blocks easy for you, I am preparing ready-made rigging plans for you according to the original documents. There are recommended blocks drawn according to clear symbols in these plans. You can find these ready-made plans for individual models together with other accessories on my website HEREYou will find all the sizes of the needed blocks in my plans. And based on the table above also corresponding diameters of ropes.

If you have further questions, write them on our e-mail below. I wish you beautiful models.

Warning - please note that the production of beech wood blocks is terminated. Therefore, I do not recommend you to buy these blocks for new projects. Rather, buy walnut blocks with much better quality.

Best regards, Radimir Beseda

Price
(0)
(0)
(0)
icoico

Deadeyes Ø 2,5mm

Product detailDeadeyes Ø 2,5mm
Catalog number: WB-DD2,5mm
In Store>100 pc
Price incl. VAT:
0,15 €/pc
 

Deadeyes Ø 3,5mm

Product detailDeadeyes Ø 3,5mm
Catalog number: WB-DD3,5mm
In Store>100 pc
Price incl. VAT:
0,13 €/pc
 

Deadeyes Ø 5mm

Product detailDeadeyes Ø 5mm
Catalog number: WB-DD5mm
In Store>100 pc
Price incl. VAT:
0,13 €/pc
 

Deadeyes Ø 6mm

Product detailDeadeyes Ø 6mm
Catalog number: WB-DD6mm
In Store>100 pc
Price incl. VAT:
0,17 €/pc
 

Deadeyes Ø 7mm

Product detailDeadeyes Ø 7mm
Catalog number: WB-DD7mm
In Store>100 pc
Price incl. VAT:
0,13 €/pc
 

Deadeyes Ø 8mm

Product detailDeadeyes Ø 8mm
Catalog number: WB-DD8mm
In Store<100 pc
Price incl. VAT:
0,21 €/pc
 

Deadeyes triangular size 3...

Product detailDeadeyes triangular size 3mm plastic
Catalog number: WB-TD3 plast
In Store<100 pc
Price incl. VAT:
1,05 €/pc
 

Set of 22 pcs Triangular deadeyes with height 3mm.

For use plastic blocks, glue the two blocks "back side" to each other. This creates a groove for the rope in the middle. Then it is necessary to pass the holes for the rope again with a drill with a diameter of 0.6 - 0.8 mm.

Deadeyes triangular size 5mm

Product detailDeadeyes triangular size 5mm
Catalog number: WB-TD5
In Store>100 pc
Price incl. VAT:
0,17 €/pc
 

Deadeyes triangular size 7mm

Product detailDeadeyes triangular size 7mm
Catalog number: WB-TD7
In Store>100 pc
Price incl. VAT:
0,17 €/pc
 

Cylinder Half-block Ø 2,5mm

Product detailCylinder Half-block Ø 2,5mm
Catalog number: WB-CR2,5
In Store>100 pc
Price incl. VAT:
0,12 €/pc
 

Cylinder Half-block Ø 3,5mm

Product detailCylinder Half-block Ø 3,5mm
Catalog number: WB-CR3,5
In Store>100 pc
Price incl. VAT:
0,12 €/pc
 

Cylinder Half-block Ø 5mm

Product detailCylinder Half-block Ø 5mm
Catalog number: WB-CR5
In Store>100 pc
Price incl. VAT:
0,12 €/pc
 

Ship chains DD5mm

Product detailShip chains for DD5mm / per piece
Catalog number: A4090/05
In Store<100 pc
Price incl. VAT:
0,71 €/pc
 

Ship chains for deadeye WB-DD5mm .
price is from one set - block of deadeye 5mm, clamp of deadeye and chains of this block

Ship chains DD5mm

Product detailShip chains for DD5mm / per piece
Catalog number: A4093/05
In Store<100 pc
Price incl. VAT:
0,71 €/pc
 

Ship chains for deadeye WB-DD5mm .
price is from one set - block of deadeye 5mm, clamp of deadeye and chains of this block

Ship chains DD5mm

Product detailShip chains for DD5mm / per piece
Catalog number: A4095/05
In Store<100 pc
Price incl. VAT:
0,79 €/pc
 

Ship chains for deadeye WB-DD5mm .
price is from one set - block of deadeye 5mm, clamp of deadeye and chains of this block

Threader of rope

Product detailThreader of rope
Catalog number: TR
In Store>100 pc
Price incl. VAT:
0,25 €/pc
 

Treader of rope trought hole from the diameter of hole 0,4mm and rope with diameter 0,1m

Search

Send newsletter

Insert here your email...

Logout newsletter

Bestsellers

Flag Toplist

Flag Counter

Valid XHTML 1.1

 

Ship kits

Accessories of Ship models

Standard modelers e-shop

Workfow

Photogalery

Plans of ships

 

Terms and Conditions

Terms of delivery

Payment Terms

Registration

How to order

Radimír Beseda - HiSModel.com
B. Nikodéma 4476/15
708 00 Ostrava
Czech Republic

Identif. number: 04581954
Tax indentity: CZ6207291640

mobil: +420 736 643 287

email: message@HiSModel.com

web: www.HiSModel.com

Write to us here

 

Webdesign – AiVision, s.r.o. | Eshop - AiShop

Banner overload

Banner overload text

Responzivní design menu

Kategorie
Menu
Vyhledávání
Přihlášení
Nahoru