Alabama - set of blocks, eyelets, hooks and ropes for gun hoists

Set of recommended CNC walnut blocks for model CSS Alabama by Revell, 1:96
Plan of rigging with recommended blocks you can find HERE
Set contains these walnut blocks:
The variant for 4 of hoist for two big  guns in midle of ship deck, each hoist is made with SB1/4+DB2/4 blocks
WaB-SB1/4 - 4*2= 8/10 pcs
WaB-DB2/4 - 4*2= 8/10 pcs
The variant for 3 of hoist for six smaller guns, each hoist is made with SB1/3+DB2/3 blocks
WaB-SB1/3 - 3*6= 18/20 pcs
WaB-DB2/3 - 3*6= 18/20 pcs
TR -1x
Summary 60 pcs
Photo-etched Eyelets and hooks:
I recommend to buy LO1,5 mm LO2 mm, LH3 mm and LH6. Some ropes should be tied and hooked. There are plastic eyelets and hooks in kit but you can change them for better metal eyelets and hooks. I recommend for guns: Each gun 8 eyelets and 4 hooks based on tackles. Togethe you need:
PE-LO1,5/B – 1x a PE-LH3/B – 4x; PE-LO2/B – 1x a PE-LH6/B – 2x
Profesional Amati ropes:
Thin rope for gun hoists R-N25/20 - diameter 0,25mm, lenght 20m - 1pcs
Breeching rope R-N75/20 - diameter 0,75mm, lenght 20m - 1pcs