CNC Violin Block 10mm - Walnut
Code: WAB-VB10Product detailed description
Violin block - this special block consisted of one larger and one smaller pulley on top of each other. The violin block was initially used where a double block was needed to tension the sheets. Or heavily loaded hoists - for example, for hoisting single mast members and large booms, or tensioning top stays. Over time in the 19th century these blocks were replaced by the standard double blocks.
Instructions on how to select the correct blocks
Instructions on how to use the blocks
Table of block size and corresponding rope diameter
Height of blocks |
Diameter of rope |
Diameter of Amati ropes |
2,0 | 0,16 | 0,1 |
2,50 | 0,2 | 0,1 |
3,00 | 0,24 | 0,25 |
2,50 | 0,28 | 0,25 |
4,00 | 0,32 | 0,25 or 0,0,5 |
4,50 | 0,36 | 0,5 |
5,00 | 0,4 | 0,5 |
6,00 | 0,48 | 0,5 |
7,00 | 0,56 | 0,5 or 0,75 |
8,00 | 0,64 | 0,75 |
9,00 | 0,72 | 1 |
10 | 0,8 | |
Additional parameters
Category: | Special blocks |
---|---|
EAN: | 8594193991327 |
Be the first who will post an article to this item!
Add a comment