Endeavour - Oak wooden deck
Code: D059/OProduct detailed description
Link to the kit HERE
Link to complete accessories for this model HERE
Instructions and workflow can be found HERE
Material: veneer thickness 0,3mm, oak
Deck description: the deck is marked in the veneer to match the historical reality. The deck was made exactly according to the plan from the book Captain Cook's Endeavor (Anatomy of the Ship) by Karl Heinz Marquardt.
There is a perimeter plank called the "waterway". The ending of the planks into a waterway, especially at the bow by "hooking" and tapering the planks towards the bow and stern along the sides of the ship. The marking of the 'treenline' pins which nailed the deck to the timbers holding the deck to the plans of the ship as shown. The veneer deck exactly matches the plastic deck of this model. All the holes in the deck are cut out here, as on the plastic substrate.
The recommended assembly procedure can be found in instructions section.
Be the first who will post an article to this item!