USS Kearsarge - set of blocks for gun hoists

Set of recommended CNC walnut blocks for guns hoist on the model 
Set contains these walnut blocks:
The variant for 4 of hoist for two big  guns in midle of ship deck, each hoist is made with SB1/4+DB2/4 blocks
WaB-SB1/4 - 4*2= 8/10pcs
WaB-DB2/4 - 4*2= 8/10pcs
The variant for 3 of hoist for 4 guns on main deks. For guns on forecastle is need four hoist. Each hoist is made with SB1/3+DB2/3 blocks.
WaB-SB1/3 - 4*3+1*4= 16/18pcs
WaB-DB2/3 - 4*3+1*4= 16/18pcs
TR -1x
Summary 56 pcs
Photo-etched Eyelets and hooks:
I recommend to buy LO1,5 mm LO2 mm, LH3 mm and LH6. Some ropes should be tied and hooked. There are plastic eyelets and hooks in kit but you can change them for better metal eyelets and hooks. I recommend for guns: Each gun 8 eyelets and 4 hooks based on tackles. Togethe you need:
PE-LO1,5/B – 1x and PE-LO2/B – 1x; PE-LH3/B – 4x and PE-LH6/B – 2;
Profesional Amati ropes:
Thin rope for gun hoists R-N25/20 - diameter 0,25mm, lenght 20m - 1pcs
Breeching rope R-N75/20 - diameter 0,75mm, lenght 20m - 1pcs